UV-CLEAN SOLUTIONS
WHY UV-CLEAN
UV-C light is used to eradicate harmful bacteria, including antibiotic resistant viruses (including Coronaviruses SARS and MERS), Staphylococcus aureus (MRSA) and Enterococcus (VRE), as well as E. coli, difficile, Proteus spp., Klebsiella spp and Listeria spp. UV-C light, included in ENS Group UV Clean solutions are being used globally to fight the COVID-19 strain. Our automated chemical-free disinfecting technology is your proven ally against the spread of infectious microorganisms.
FACTS: The virus of COVID-19 (SARS-CoV-2) is a close relative and 80% genetically related to SARS Coronavirus (SARS-CoV-1) from 2003. SARS-CoV-1 has been extensively tested against UV-C disinfection devices and UV-C light is proven to eliminate any traces of SARS-CoV-1 Coronavirus on treated surfaces. Today, UV-C light is being used to disinfect surfaces in hospital rooms, ambulances and airplanes and is an effective way to combat COVID-19 (SARS-CoV-2) transmission. UV-C light is also being used to disinfect single use N95 masks so they can be reused up to 10 times.
Pandemic
COVID-19 has created a safety concern for both customers and employees that is unprecedented in our nation’s history.
Travel and Retail
Airlines, Retailers, Grocery Stores, Restaurants, Banks, Hotels and other businesses with high-touch technologies are seeking solutions to protect their customers and employees from virus transmission.
Cost
In North America, companies spend Billions of Dollars on high touch technology (Touchscreens, payment terminals, tablets, handheld devices, phones…etc.)
Health and Safety
80% of all pathogens (viruses, bacteria or microorganisms that can cause disease) are transferred by touch (hands to face).
Shared touchscreens and Keypads
Public touchscreens are a petri dish for bacteria. Solutions need to be implemented to protect individuals from pathogens on high touch technology surfaces.
WHAT IS UV-CLEAN?
ENS GROUP UV-CLEAN: SAFETY AND TRANSFER
TOUCH. DISINFECT. REPEAT WITH UV-CLEAN.
UVC Light- Safe to have in your stores, restaurants, banks, hotels or other areas where humans are interacting with high touch technology
“Far-UVC light has a very limited range and cannot penetrate through the outer dead-cell layer of human skin or the tear layer in the eye, so it’s not a human health hazard,” Dr. Brenner noted. “But because viruses and bacteria are much smaller than human cells, far-UVC light can reach their DNA and kill them.”
COVID-19 can be transferred via water droplets (sneezing and coughing) within a 6 foot radius of infected individual
WHY UV-CLEAN NOW
UV-C light is used to Eradicate harmful bacteria, including antibiotic resistant viruses (including Coronaviruses SARS and MERS), Staphylococcus aureus (MRSA) and Enterococcus (VRE), as well as E. coli, difficile, Proteus spp., Klebsiella spp and Listeria spp.
In 2003, UV-C light was proven to eliminate any traces of SARS Coronavirus on treated surfaces
In 2012, UV-C light was proven to eliminate any traces of MERS Coronavirus on treated surfaces
Every indication is that UV-C light will be effective when used to combat current Coronavirus outbreak (COVID-19)
MERS and SARS viruses were able to live 1-4 days on a touchscreen. The same lifespan is expected for the new COVID-19 strains.
HOW UV-CLEAN WORKS
| Distance Below Bulb | UV24 – Hg BULB |
|---|---|
| 1 inch | 1330uW/cm2 |
| 3.5 inch | 395uW/cm2 |
| 7 inch | 118uW/cm2 |
UV-CLEAN: WHO’S USING IT?
UV-C light is currently being used in US and Globally to safely disinfect hospital rooms, ambulances and airplanes.
All post treatment tests are yielding 99%+ microorganism eradication
UV-Clean is already accepted in the healthcare industry so it is proven to protect.
UVC technology is on the global front line battling and winning against the COVID-19 pandemic
UVC light is being used to disinfect single use N95 medical masks – so they can be reused up to 10 times
UV-CLEAN: CLINICAL STUDY RESULTS
Bacteria BEFORE UV-Clean Installation
PRE-DISINFECTION KEYBOARD ANALYSIS
Bacteria AFTER UV-Clean Installation
POST-DISINFECTION KEYBOARD ANALYSIS
BASCILLIS SPP. 0.0%
STAPHYLOCOCCUS SPP. 0.0%
ENTEROCOCCUS SPP. NON-VRE 0.0%
ENTEROCOCCUS SPP. VRE (SUPER BUG) 0.0%
DIPHTHEROID SPP. 0.0%
*It is important to note that no bacteria, including the ones previously found positive, were found in post disinfection swabs. Negative for all bacteria.
BE THE LEADER IN POSITIVE HEADLINES
WHERE CAN YOU USE UV-CLEAN?
UV-CLEAN VALIDATION PROGRAM: HOW IT WORKS
The UV-Clean Validation Program is intended to:
PRODUCT LINEUP
UV Cube
UV 24
UV Stand Alone
UV Clamp Mount
UV24-Keyboard Mount
UV PinPad
UV STAND ALONE UNIT
UV-Clean Stand Alone unit is designed for placement of small portable tablets and cell phones in the stainless-steel tray providing a quick and easy way to disinfect devices. UV-C light is dispensed at timed intervals with low levels up to 24″ away.
The Stand Alone unit requires minimal assembly, just attach the head unit to the stand. With high touch items, a regular cleaning with low doses of UV-C light eliminates the transfer of harmful pathogens.
UV-24 Tablet, PinPad and Scanner
UV-24 head attaches to any tablet/payment solution. UV-C light is dispensed at timed intervals with low levels up to 24″ away.
This unit requires minimal assembly, just attach the head and appropriate bracket to any screen under 24” and a side attached payment device.
Kills 99.9% of pathogens
Automated & customized cleaning cycles
Motion-sensor activation
USE CASES
UV24-Keyboard Mount
UV-24 for Payment
UV-24 head attaches to any payment solution. UV-C light is dispensed at timed intervals to disinfect the pinpad between users and NOT DAMAGE device.
This unit requires minimal assembly, unique brackets attach the head and to almost any pinpad and mounting system.
USE CASES
All payment locations
UVC–CUBE
UV-CUBE provides 360˚ active cleaning area that kills 99.9% of pathogens after one minute and 99.999% after two minutes.
This unit requires no assembly, just plug in a go.
3 Cleaning Modes
UV-Clean
Quick 3-minute cleaning cycle
UV-Clean & Dry
3 min cleaning cycle + Dry Cycle via Internal Fan and Warming Element. Internal humidity checks and automatic shut off once dry.
UV-Clean & Store
3 min cleaning cycle + Store Cycle (Temp Control and periodic UV emittance.
Protect Your Technology Investment
- Companies spend Billions annually on high touch technology (tablets, touchscreens, phones and payment devices).
- Manufacture guides instruct users to “Prevent moisture entering into any device opening”….but moisture can enter devices via the: Home Button, Speakers, Volume Control, Power Button, Keypads, Audio Jack & Cracks in the Touch Screen…..openings are everywhere on devices!
- Standard cleaning protocol for most devices is for the device be powered down to avoid Electrostatic Discharge (ESD) which can permanently damage your device.
- Equipment degradation via excessive cleaning and incorrect cleaning practices is inevitable and will lead to shorter technology lifespans, higher maintenance costs and frustrated customers/store employees.
- The ability and associated costs of trying to clean and disinfect devices via human labor routinely throughout the day, is both unlikely and expensive.
Traditional Disinfection Process
- Power down the device.
- Dampen clean, non-abrasive cloth with disinfectant.
- Ensure excess liquid is squeezed from the cloth or use pre-dampened wipes.
- Surface must remain wet for several minutes;
- Continuous wiping might be required.
- Allow the surface to dry.
UV-Clean
- UV-Clean Cycle Starts Automatically
- 99% eradication of viruses, bacteria and mold
- Repeats automatically